A directory of where to buy chemicals in the USA, including: distributors, industrial manufacturers, bulk supplies and wholesalers of raw ingredients & finished goods.
Search for products or services, then visit the suppliers website for prices or more information.
| Product | Description | |
|---|---|---|
| Poly(9,9-di-n-hexylfluorenyl-2,7-vinylene) | Poly(9,9-di-n-hexylfluorenyl-2,7-vinylene). |  |
| Poly(9,9-di-n-octylfluorenyl-2,7-diyl) | Poly(9,9-di-n-octylfluorenyl-2,7-diyl) (PFO) is a blue light emitting fluorescent polymer with high electroluminescence quantum yield and chemical stability. It can form an emissive layer on the surface of the optoelectronic devices. Molecular formula: C8H9(C29H40)nC8H9. Mole weight: ≥20. | |
| Poly(9.9-Di-N-octylfluorenyl-2,7diyl) | Poly(9.9-Di-N-octylfluorenyl-2,7diyl). CAS No: 195456-48-5 |  Sarchem Laboratories New Jersey NJ |
| Poly[(9,9-di-n-octylfluorenyl-2,7-diyl)-alt-(benzo[2,1,3]thiadia-zol-4,8-diyl)], Mw 10,000-100,000 by GPC | Poly[(9,9-di-n-octylfluorenyl-2,7-diyl)-alt-(benzo[2,1,3]thiadia-zol-4,8-diyl)], Mw 10,000-100,000 by GPC. CAS No. 210347-52-7. | |
| Poly(9,9-dioctyl-9H-fluorene-2,7-diyl) | Polyfluorenes (PFs) are one of the most important PLED materials, showing a strong blue fluorescence stabilized by its rigid, conjugated structure. Alternative Names: PFO,Poly(9,9- dioctylfluorene),Poly(9,9-di-n-octylfluorenyl-2,7-diyl). Molecular formula: C8H9(C29H40)nC8H9. | |
| Poly(9 9-dioctylfluoren& | Poly(9 9-dioctylfluoren&. Alternative Names: POLY(9 9-DIOCTYLFLUOREN&;POLY(9,9-DIOCTYL-2,7-DI-1-PROPYNYL-9H-FLUO RENE). CAS No. 278176-17-3. | |
| Poly[(9,9-dioctylfluorene-2,7-diyl)-alt-(N,N'-diphenylbenzidine-N,N'-diyl], Mw 10,000-100,000 by GPC | Poly[(9,9-dioctylfluorene-2,7-diyl)-alt-(N,N'-diphenylbenzidine-N,N'-diyl], Mw 10,000-100,000 by GPC. CAS No. 484032-91-9. | |
| Poly[(9,9-dioctylfluorenyl-2,7-diyl)-alt-(2-methoxy-5-(2-ethylhexyloxy)phenylenevinylene-1,4-diyl)], Mw 10,000-100,000 by GPC | Poly[(9,9-dioctylfluorenyl-2,7-diyl)-alt-(2-methoxy-5-(2-ethylhexyloxy)phenylenevinylene-1,4-diyl)], Mw 10,000-100,000 by GPC. CAS No. 1383605-56-8. | |
| Poly[(9,9-dioctylfluorenyl-2,7-diyl)-alt-(4,4'-(N-(4-butylphenyl), Mw 10,000-100,000 by GPC | Gallium is a silvery-white liquid at room temperature. Ingestion of this material may be toxic. It is corrosive to aluminum. If exposed to high temperatures, gallium may emit toxic fumes which may form a corrosive alkaline solution with water. It is soluble in most acids and alkalis. It is used as a semiconductor material.;OtherSolid; PelletsLargeCrystals. CAS No. 223569-31-1. Molecular formula: Ga. Mole weight: 69.72g/mol. IUPAC Name: gallium. SMILES: [Ga]. InChI: InChI=1S/Ga. | |
| Poly[(9,9-dioctylfluorenyl-2,7-diyl)-alt-(N,N'-bis{p-butylphenyl}-1,1'-biphenylene-4,4'-diamine)] | Poly[(9,9-dioctylfluorenyl-2,7-diyl)-alt-(N,N'-bis{p-butylphenyl}-1,1'-biphenylene-4,4'-diamine)]. CAS No. 1115424-53-7. Product ID: ACM1115424537. Molecular formula: (C61H74N2)n. Alfa Chemistry - ISO 9001:32057 Certified. |  |
| Poly(9,9-dioctylfluorenyl-2,7-diyl) end capped with dimethylphenyl, Mw 10,000-100,000 by GPC | Poly(9,9-dioctylfluorenyl-2,7-diyl) end capped with dimethylphenyl, Mw 10,000-100,000 by GPC. CAS No. 195456-48-5. | |
| Poly(9,9-n-dihexyl-2,7-fluorene-alt-9-phenyl-3,6-carbazole) | Poly(9,9-n-dihexyl-2,7-fluorene-alt-9-phenyl-3,6-carbazole). Uses: For analytical and research use. CAS No. 856893-75-9. Catalog: AP856893759. |  |
| Poly(9,9-n-dihexyl-2,7-fluorene-alt-9-phenyl-3,6-carbazole) | Blue light emitting polymer. Alternative Names: Poly(9,9-n-dihexyl-2,7-fluorene-alt-9-phenyl-3,6-carbazole). CAS No. 856893-75-9. Molecular formula: (C42H43N)N. Mole weight: average 9.195. | |
| Poly(9-anthracenylmethyl acrylate) | Poly(9-anthracenylmethyl acrylate). | |
| Poly(9-anthracenylmethyl methacrylate) | Poly(9-anthracenylmethyl methacrylate). Molecular formula: C21H22O2. Mole weight: 306.4g/mol. IUPAC Name: anthracen-9-ylmethyl 2,2-dimethylbutanoate. SMILES: CCC(C)(C)C(=O)OCC1=C2C=CC=CC2=CC3=CC=CC=C31. InChI: InChI=1S/C21H22O2/c1-4-21(2,3)20(22)23-14-19-17-11-7-5-9-15(17)13-16-10-6-8-12-18(16)19/h5-13H,4,14H2,1-3H3. | |
| Poly(9H-carbazole-9-ethyl acrylate) | Poly(9H-carbazole-9-ethyl acrylate). Uses: For analytical and research use. CAS No. 69678-49-5. Catalog: AP69678495. | |
| Poly(9H-carbazole-9-ethyl methacrylate) | Poly(9H-carbazole-9-ethyl methacrylate). | |
| Poly(9H-carbazole-9-ethyl acrylate) | Poly(9H-carbazole-9-ethyl acrylate). Alternative Names: POLY(9H-CARBAZOLE-9-ETHYL ACRYLATE);poly[2-(9h-carbazol-9-yl)ethyl acrylate]. CAS No. 69678-49-5. Molecular formula: (C17H15NO2)n. Purity: 96%. | |
| Poly(9-vinylcarbazole) | Poly(9-vinylcarbazole). Uses: For analytical and research use. CAS No. 25067-59-8. Catalog: AP25067598. | |
| Poly(9-vinylcarbazole) | Poly(9-vinylcarbazole) (PVK) is a conductive polymer which is mainly used as a hole transporting medium at high efficiencies with low driving voltage. It can also be used as an anode for hole injection and can act as an effective charge transferring gate by co-doping it with organic dyes. Alternative Names: PVK. CAS No. 25067-59-8. Molecular formula: C14H11N. Mole weight: 193.24g/mol. IUPAC Name: 9-ethenylcarbazole. SMILES: C=CN1C2=CC=CC=C2C3=CC=CC=C31. InChI: 1S/C14H11N/c1-2-15-13-9-5-3-7-11(13)12-8-4-6-10-14(12)15/h2-10H,1H2,KKFHAJHLJHVUDM-UHFFFAOYSA-N. | |
| Poly(9-vinylcarbazole), Mw 100,000-1000,000 | Poly(9-vinylcarbazole), Mw 100,000-1000,000. CAS No. 25067-59-8. Molecular formula: C14H11N. Mole weight: 193.24g/mol. IUPAC Name: 9-ethenylcarbazole. SMILES: C=CN1C2=CC=CC=C2C3=CC=CC=C31. InChI: InChI=1S/C14H11N/c1-2-15-13-9-5-3-7-11(13)12-8-4-6-10-14(12)15/h2-10H,1H2. | |
| Polyacenaphthylene | The polymer product is a hydrophobic material that is insoluble in water or other polar solvents. Alternative Names: Oligoacenaphthylene, Acenaphthylene polymer. CAS No. 25036-01-5. Molecular formula: CH313CH(NH2)CO2H. Mole weight: average Mw 5,000-10,000. | |
| POLYACETAL | Acetal appears as a clear colorless liquid with a pleasant odor. Boiling point 103-104°C. Flash point -5°F. Density 0.831 g / cm³. Slightly soluble in water. Vapors heavier than air. Moderately toxic and narcotic in high concentrations.;Liquid;Liquid;COLOURLESS LIQUID WITH PUNGENT ODOUR.;volatile colourless liquid with a refreshing, pleasant, fruity-green odour. Molecular formula: C6H14O2;C6H14O2. Mole weight: 118.17g/mol. IUPAC Name: 1,1-diethoxyethane. SMILES: CCOC(C)OCC. InChI: InChI=1S/C6H14O2/c1-4-7-6(3)8-5-2/h6H,4-5H2,1-3H3. | |
| Poly(acetaldehyde-resorcinol) | Poly(acetaldehyde-resorcinol). Alternative Names: acetaldehyde-resorcinol copolymer;Acetaldehyde-resorcinol resin;poly(acetaldehyde-resorcinol);Acetaldehyde, polymer with 1,3-benzenediol;Acetaldehyde resorcinol reaction product;Rubber adhesive RE. CAS No. 28410-56-2. Molecular formula: C8H10O3. Mole weight: 154.16g/mol. IUPAC Name: acetaldehyde;benzene-1,3-diol. SMILES: CC=O.C1=CC(=CC(=C1)O)O. InChI: InChI=1S/C6H6O2.C2H4O/c7-5-2-1-3-6(8)4-5;1-2-3/h1-4,7-8H;2H,1H3. | |
| Polyacrylamide | Polyacrylamide. Synonyms: acrylamide, polymers; acrylamidehomopolymer; americancyanamidkpam; americancyanamidp-250; aminogenpa; ap273; CPAM; pam1800. CAS No. 9003-5-8. Pack Sizes: 1 kg. Product ID: CDF4-0149. Molecular formula: C3H5NO. Category: Stabilizers and Thickeners. Product Keywords: Food Ingredients; Stabilizers and Thickeners; Polyacrylamide; CDF4-0149; 9003-05-8; C3H5NO; 231-545-4; 9003-05-8. Purity: 0.99. Color: White to faintly yellow. EC Number: 231-545-4. Physical State: Granules. Solubility: Water. Melting Point: >300 °C. Density: 1.189 g/mL at 25 °C. Product Description: Intelligent Swelling/Collapsing copolymer that can be used as a temperature- and pH-sensitive material. |  |
| Polyacrylamide | Polyacrylamide. Group: Biochemicals. Alternative Names: Acrylamide, polymers (8CI); 2-Propenamide hydrochloride homopolymer; 2300S; 2J; 3330s; 38F; 920MPM; AK; AK (flocculant); AMF; AP 273; ASP 6; Accotrol S 622; Acrylamide homopolymer; Acrylamide polymer; Acryperse M 2000A; Acryperse M 2000H; Alcoflood 1175; American Cyanamid KPAM; American Cyanamid P 250; Aminogen PA; Amol; Aquamid; Aquasorb 3005KB; Aron F 40; BanDrift; Boze Floc N 46BT; CM 303; CM 311; CM 311 (polymer); CPF 802; CS 141; CS 141 (polymer); Calgon 470; Calgon 800; Cogum 20P; Cogum 25H; Colsize WLV; Companion PCT 12; Cosmogel; Cosmotone Z; Criterion TGX Any kD Stain-Free Precast Gel; Cyanamer A 15L; Cyanamer N 10; Cyanamer N 100; Cyanamer N 100L; Cyanamer N 300; Cyanamer N 300LMW; Cyanamer P 250; Cyanamer P 35; Cytame 5; DALT; DK Dry Capsule ESP; DKS-ORP-F 40NT; DP 1916; DP 9-6193; DP 9-8177; DP-FO; DS 415; DS 4356; DS 470; Diaclear MA 3000H; Diaclear MN 3000; Diaclear MN 3000H; Discol 4600; Dow 164; Dow ET 597; Dow J 100; E 936; ET 597; EX 288; EX 420; Fennopol K 6450; Floc 1403C; Floc 1405C; Floc 1408C; Flopam AN 945; Flygtol GB; Formacryl; Formula 358; GPA-u; Gelamide 250; Get-Down; H 106; H 106 (acrylic resin); Hamacoat P 3800; Haricoat 1057; Haricoat 6045; Haricoat G 160; H. CAS No. 9003-5-8. Pack Sizes: 1g. Molecular Formula: (C3H5NO)x, Molecular Weight: 101.15. US Biological Life Sciences. |  Worldwide |
| Polyacrylamide | Acrylamide appears as white crystalline solid shipped either as a solid or in solution. A confirmed carcinogen. Toxic by skin absorption. Less dense than water and soluble in water. May be toxic by ingestion. Used for sewage and waste treatment, to make dyes, adhesives. The solid is stable at room temperature, but upon melting may violently polymerize. Toxic, irritating to skin, eyes, etc.;Acrylamide solution, [aqueous] appears as a colorless aqueous solution of a solid. Often at a concentration of 40% (w/v). Spills can easily penetrate the soil and contaminate groundwater and nearby streams. Used for sewage and waste treatment and to make dyes and adhesives. Toxic, irritating to skin, eyes, etc. Produce toxic oxides of nitrogen when burned.;Acrylamide solution, [flammable liquid label] appears as a solution of a colorless crystalline solid. Flash point depends on the solvent but below 141°F. Less dense than water. Vapors heavier than air. Toxic oxides of nitrogen produced during combustion. Used for sewage and waste treatment, to make dyes and adhesives.;DryPowder; Liquid; OtherSolid;Solid;WHITE CRYSTALS.;White crystalline, odorless solid.;White crystalline, odorless solid. Alternative Names: 2-Propenamide, homopolymer. CAS No. 9003-5-8. Product ID: ACM9003058-20. Molecular formula: C3H5NO. Mole weight: 71.08. IUPAC Name: Prop-2-enamide. Canonical SMILES: C=CC(=O)N. ECNumber: 201-173-7;618-350-3;618-657-2. Alfa Chemistry | |
| Polyacrylamide | Acrylamide appears as white crystalline solid shipped either as a solid or in solution. A confirmed carcinogen. Toxic by skin absorption. Less dense than water and soluble in water. May be toxic by ingestion. Used for sewage and waste treatment, to make dyes, adhesives. The solid is stable at room temperature, but upon melting may violently polymerize. Toxic, irritating to skin, eyes, etc.;Acrylamide solution, [aqueous] appears as a colorless aqueous solution of a solid. Often at a concentration of 40% (w/v). Spills can easily penetrate the soil and contaminate groundwater and nearby streams. Used for sewage and waste treatment and to make dyes and adhesives. Toxic, irritating to skin, eyes, etc. Produce toxic oxides of nitrogen when burned.;Acrylamide solution, [flammable liquid label] appears as a solution of a colorless crystalline solid. Flash point depends on the solvent but below 141°F. Less dense than water. Vapors heavier than air. Toxic oxides of nitrogen produced during combustion. Used for sewage and waste treatment, to make dyes and adhesives.;DryPowder; Liquid; OtherSolid;Solid;WHITE CRYSTALS.;White crystalline, odorless solid.;White crystalline, odorless solid. Alternative Names: 2-Propenamide, homopolymer. CAS No. 9003-5-8. Molecular formula: C3H5NO. Mole weight: 71.08. IUPAC Name: Prop-2-enamide. SMILES: C=CC(=O)N. InChI: HRPVXLWXLXDGHG-UHFFFAOYSA-N. | |
| Poly(acrylamide) | Acrylamide appears as white crystalline solid shipped either as a solid or in solution. A confirmed carcinogen. Toxic by skin absorption. Less dense than water and soluble in water. May be toxic by ingestion. Used for sewage and waste treatment, to make dyes, adhesives. The solid is stable at room temperature, but upon melting may violently polymerize. Toxic, irritating to skin, eyes, etc.;Acrylamide solution, [aqueous] appears as a colorless aqueous solution of a solid. Often at a concentration of 40% (w/v). Spills can easily penetrate the soil and contaminate groundwater and nearby streams. Used for sewage and waste treatment and to make dyes and adhesives. Toxic, irritating to skin, eyes, etc. Produce toxic oxides of nitrogen when burned.;Acrylamide solution, [flammable liquid label] appears as a solution of a colorless crystalline solid. Flash point depends on the solvent but below 141°F. Less dense than water. Vapors heavier than air. Toxic oxides of nitrogen produced during combustion. Used for sewage and waste treatment, to make dyes and adhesives.;DryPowder; Liquid; OtherSolid;Solid;WHITE CRYSTALS.;White crystalline, odorless solid.;White crystalline, odorless solid. CAS No. 9003-5-8. Molecular formula: C3H5NO;CH2=CH-CONH2;C3H5NO;C3H5NO. Mole weight: 71.08g/mol. IUPAC Name: prop-2-enamide. SMILES: C=CC(=O)N. InChI: InChI=1S/C3H5NO/c1-2-3(4)5/h2H,1H2,(H2,4,5). | |
| Poly(acrylamide/acrylic acid),Na salt (technical grade) | Poly(acrylamide/acrylic acid),Na salt (technical grade). Alternative Names: 2-Propenoicacid,sodiumsalt,polymerwith2-propenamide. CAS No. 25085-02-3. Purity: 10%. Product ID: ACM25085023-2. Alfa Chemistry - ISO 9001:32057 Certified. | |
| Polyacrylamide,average Mn 150000 | Polyacrylamide, average Mn 150000 (PAM, average Mn 150000) is a versatile, high-molecular-weight polyacrylamide copolymer. Polyacrylamide series materials can maintain enzyme activity in enzyme immobilization, act as drug carriers to achieve controlled release, serve as smart materials responding to temperature/pH stimuli, and be used for in vitro toxin adsorption and soft tissue filling through mechanisms such as physical entrapment, covalent binding or chemical crosslinking. Polyacrylamide finds applications in biomedical engineering, environmental management and industrial applications[1]. Uses: Scientific research. Category: Signaling pathways. Alternative Names: PAM,average Mn 150000. CAS No. 9003-5-8. Pack Sizes: 100 mg; 250 mg; 500 mg; 1 g. Product ID: HY-W115727E. |  |
| Poly(acrylamide-co-acrylic acid) | Poly(acrylamide-co-acrylic acid). Alternative Names: POLY(ACRYLAMIDE), CARBOXYL MODIFIED;POLY(ACRYLAMIDE-CO-ACRYLIC ACID);POLY(ACRYLAMIDE/ACRYLATE);2-Propenoicacid,polymerwith2-propenamide;ACRYLATES/ACRYLAMIDE COPOLYMER;Acrylamide-acrylic acid copolymer;anionic (type) polyacrylamide;Acrylic acid-Acrylamide copolymer. CAS No. 9003-6-9. Molecular formula: C6H9NO3. Mole weight: 143.14g/mol. IUPAC Name: prop-2-enamide;prop-2-enoic acid. SMILES: C=CC(=O)N.C=CC(=O)O. InChI: InChI=1S/C3H5NO.C3H4O2/c2*1-2-3(4)5/h2H,1H2,(H2,4,5);2H,1H2,(H,4,5). | |
| Poly(acrylamide-co-acrylic acid) partial sodium salt | The hydrophilic polymer contains polar or charged functional groups, making it soluble in water. CAS No. 62649-23-4. Molecular formula: C9H12NNaO5. Mole weight: Mn 150,000 (Typical) Mw 520,000. IUPAC Name: sodium;prop-2-enamide;prop-2-enoate;prop-2-enoic acid. SMILES: [Na+].NC(=O)C=C.OC(=O)C=C.[O-]C(=O)C=C. InChI: 1S/C3H5NO.2C3H4O2.Na/c3*1-2-3(4)5;/h2H,1H2,(H2,4,5);2*2H,1H2,(H,4,5);/q;;;+1/p-1. | |
| Poly(acrylamide-co-acrylic acid) potassium salt | The hydrophilic polymer contains polar or charged functional groups, making it soluble in water. Alternative Names: Acrylamide-potassium acrylate copolymer. CAS No. 31212-13-2. Molecular formula: C6H8KNO3. Mole weight: 181.23g/mol. IUPAC Name: potassium;prop-2-enamide;prop-2-enoate. SMILES: NC(=O)C=C.[K]OC(=O)C=C. InChI: 1S/C3H5NO.C3H4O2.K/c2*1-2-3(4)5;/h2H,1H2,(H2,4,5);2H,1H2,(H,4,5);/q;;+1/p-1. | |
| Poly(acrylamide-co-diallyldimethylammonium chloride) solution | The hydrophilic polymer contains polar or charged functional groups, making it soluble in water. Alternative Names: P(AAm-co-DADMAC). CAS No. 26590-05-6. Molecular formula: C11H21ClN2O. Mole weight: 232.75g/mol. IUPAC Name: dimethyl-bis(prop-2-enyl)azanium;prop-2-enamide;chloride. SMILES: C[N+](C)(CC=C)CC=C.C=CC(=O)N.[Cl-]. InChI: 1S/C8H16N.C3H5NO.ClH/c1-5-7-9(3,4)8-6-2;1-2-3(4)5;/h5-6H,1-2,7-8H2,3-4H3;2H,1H2,(H2,4,5);1H/q+1;;/p-1. | |
| Poly(acrylamide-co-diallyldimethylammonium chloride) solution, 10 wt. % in H2O | Poly(acrylamide-co-diallyldimethylammonium chloride) solution, 10 wt. % in H2O. CAS No. 26590-05-6. Molecular formula: C11H21ClN2O. Mole weight: 232.75g/mol. IUPAC Name: dimethyl-bis(prop-2-enyl)azanium;prop-2-enamide;chloride. SMILES: C[N+](C)(CC=C)CC=C.C=CC(=O)N.[Cl-]. InChI: InChI=1S/C8H16N.C3H5NO.ClH/c1-5-7-9(3,4)8-6-2;1-2-3(4)5;/h5-6H,1-2,7-8H2,3-4H3;2H,1H2,(H2,4,5);1H/q+1;;/p-1. | |
| Polyacrylamide, nonionic, average Mw 12000,000 | Acrylamide appears as white crystalline solid shipped either as a solid or in solution. A confirmed carcinogen. Toxic by skin absorption. Less dense than water and soluble in water. May be toxic by ingestion. Used for sewage and waste treatment, to make dyes, adhesives. The solid is stable at room temperature, but upon melting may violently polymerize. Toxic, irritating to skin, eyes, etc.;Acrylamide solution, [aqueous] appears as a colorless aqueous solution of a solid. Often at a concentration of 40% (w/v). Spills can easily penetrate the soil and contaminate groundwater and nearby streams. Used for sewage and waste treatment and to make dyes and adhesives. Toxic, irritating to skin, eyes, etc. Produce toxic oxides of nitrogen when burned.;Acrylamide solution, [flammable liquid label] appears as a solution of a colorless crystalline solid. Flash point depends on the solvent but below 141°F. Less dense than water. Vapors heavier than air. Toxic oxides of nitrogen produced during combustion. Used for sewage and waste treatment, to make dyes and adhesives.;DryPowder; Liquid; OtherSolid;Solid;WHITE CRYSTALS.;White crystalline, odorless solid.;White crystalline, odorless solid. CAS No. 9003-5-8. Molecular formula: C3H5NO;CH2=CH-CONH2;C3H5NO;C3H5NO. Mole weight: 71.08g/mol. IUPAC Name: prop-2-enamide. SMILES: C=CC(=O)N. InChI: InChI=1S/C3H5NO/c1-2-3(4)5/h2H,1H2,(H2,4,5). | |
| Polyacrylamide, nonionic, average Mw 14000,000 | Acrylamide appears as white crystalline solid shipped either as a solid or in solution. A confirmed carcinogen. Toxic by skin absorption. Less dense than water and soluble in water. May be toxic by ingestion. Used for sewage and waste treatment, to make dyes, adhesives. The solid is stable at room temperature, but upon melting may violently polymerize. Toxic, irritating to skin, eyes, etc.;Acrylamide solution, [aqueous] appears as a colorless aqueous solution of a solid. Often at a concentration of 40% (w/v). Spills can easily penetrate the soil and contaminate groundwater and nearby streams. Used for sewage and waste treatment and to make dyes and adhesives. Toxic, irritating to skin, eyes, etc. Produce toxic oxides of nitrogen when burned.;Acrylamide solution, [flammable liquid label] appears as a solution of a colorless crystalline solid. Flash point depends on the solvent but below 141°F. Less dense than water. Vapors heavier than air. Toxic oxides of nitrogen produced during combustion. Used for sewage and waste treatment, to make dyes and adhesives.;DryPowder; Liquid; OtherSolid;Solid;WHITE CRYSTALS.;White crystalline, odorless solid.;White crystalline, odorless solid. CAS No. 9003-5-8. Molecular formula: C3H5NO;CH2=CH-CONH2;C3H5NO;C3H5NO. Mole weight: 71.08g/mol. IUPAC Name: prop-2-enamide. SMILES: C=CC(=O)N. InChI: InChI=1S/C3H5NO/c1-2-3(4)5/h2H,1H2,(H2,4,5). | |
| Polyacrylamide, nonionic, average Mw 5000,000 | Acrylamide appears as white crystalline solid shipped either as a solid or in solution. A confirmed carcinogen. Toxic by skin absorption. Less dense than water and soluble in water. May be toxic by ingestion. Used for sewage and waste treatment, to make dyes, adhesives. The solid is stable at room temperature, but upon melting may violently polymerize. Toxic, irritating to skin, eyes, etc.;Acrylamide solution, [aqueous] appears as a colorless aqueous solution of a solid. Often at a concentration of 40% (w/v). Spills can easily penetrate the soil and contaminate groundwater and nearby streams. Used for sewage and waste treatment and to make dyes and adhesives. Toxic, irritating to skin, eyes, etc. Produce toxic oxides of nitrogen when burned.;Acrylamide solution, [flammable liquid label] appears as a solution of a colorless crystalline solid. Flash point depends on the solvent but below 141°F. Less dense than water. Vapors heavier than air. Toxic oxides of nitrogen produced during combustion. Used for sewage and waste treatment, to make dyes and adhesives.;DryPowder; Liquid; OtherSolid;Solid;WHITE CRYSTALS.;White crystalline, odorless solid.;White crystalline, odorless solid. CAS No. 9003-5-8. Molecular formula: C3H5NO;CH2=CH-CONH2;C3H5NO;C3H5NO. Mole weight: 71.08g/mol. IUPAC Name: prop-2-enamide. SMILES: C=CC(=O)N. InChI: InChI=1S/C3H5NO/c1-2-3(4)5/h2H,1H2,(H2,4,5). | |
| Polyacrylamide, nonionic, average Mw 7000,000 | Acrylamide appears as white crystalline solid shipped either as a solid or in solution. A confirmed carcinogen. Toxic by skin absorption. Less dense than water and soluble in water. May be toxic by ingestion. Used for sewage and waste treatment, to make dyes, adhesives. The solid is stable at room temperature, but upon melting may violently polymerize. Toxic, irritating to skin, eyes, etc.;Acrylamide solution, [aqueous] appears as a colorless aqueous solution of a solid. Often at a concentration of 40% (w/v). Spills can easily penetrate the soil and contaminate groundwater and nearby streams. Used for sewage and waste treatment and to make dyes and adhesives. Toxic, irritating to skin, eyes, etc. Produce toxic oxides of nitrogen when burned.;Acrylamide solution, [flammable liquid label] appears as a solution of a colorless crystalline solid. Flash point depends on the solvent but below 141°F. Less dense than water. Vapors heavier than air. Toxic oxides of nitrogen produced during combustion. Used for sewage and waste treatment, to make dyes and adhesives.;DryPowder; Liquid; OtherSolid;Solid;WHITE CRYSTALS.;White crystalline, odorless solid.;White crystalline, odorless solid. CAS No. 9003-5-8. Molecular formula: C3H5NO;CH2=CH-CONH2;C3H5NO;C3H5NO. Mole weight: 71.08g/mol. IUPAC Name: prop-2-enamide. SMILES: C=CC(=O)N. InChI: InChI=1S/C3H5NO/c1-2-3(4)5/h2H,1H2,(H2,4,5). | |
| polyacrylate rubber | polyacrylate rubber. | |
| Poly(acrylic acid) | Poly(acrylic acid). CAS No. 27599-56-0. | |
| Poly(acrylic acid) | Poly (acrylic acid) (PAA) is hygroscopic, brittle and colorless in nature with Tg at nearly 106oC. At temperatures above 200 to 250oC, it loses water and becomes an insoluble crosslinked polymer anhydride. Solubility of dried PAA in water increases with rise in temperatures. Concentrated solutions of PAA in water is thixotropic in nature. CAS No. 9003-1-4. Molecular formula: C3H4O2;CH2=CHCOOH;C3H4O2. Mole weight: average Mw 1800. IUPAC Name: prop-2-enoic acid. SMILES: C=CC(=O)O. InChI: 1S/C3H4O2.Na/c1-2-3(4)5;/h2H,1H2,(H,4,5);/q;+1/p-1. | |
| Poly(acrylic acid), | Acrylic acid is a colorless liquid with a distinctive acrid odor. Flash point 130°F. Boiling point 286°F. Freezing point 53°F. Corrosive to metals and tissue. Prolonged exposure to fire or heat can cause polymerization. If polymerization takes place in a closed container, violent rupture may occur. The inhibitor (usually hydroquinone) greatly reduces the tendency to polymerize.;Acrylic acid, [waste] appears as a colorless liquid with a distinctive acrid odor. Combustible. Flash point 130°F. Boiling point 286°F. Freezing point 121°F. Corrosive to metals and tissue. May polymerize under prolonged exposure to fire or heat. If polymerization occurs in a container violent rupture may occur. Generally shipped with an inhibitor such as hydroquinone to prevent polymerization.;Liquid;Liquid;COLOURLESS LIQUID WITH PUNGENT ODOUR.;Colorless liquid or solid (below 55°F) with a distinctive, acrid odor.;Colorless liquid or solid (below 55°F) with a distinctive, acrid odor. [Note: Shipped with an inhibitor (e.g., hydroquinone) since it readily polymerizes.]. CAS No. 9003-1-4. Molecular formula: C3H4O2;CH2=CHCOOH;C3H4O2. Mole weight: 72.06g/mol. IUPAC Name: prop-2-enoic acid. SMILES: C=CC(=O)O. InChI: InChI=1S/C3H4O2/c1-2-3(4)5/h2H,1H2,(H,4,5). | |
| Polyacrylic acid | Poly(acrylic acid) (PAA or Carbomer) is generic name for synthetic high molecular weight polymers of acrylic acid. They may be homopolymers of acrylic acid, crosslinked with an allyl ether pentaerythritol, allyl ether of sucrose or allyl ether of propylene. In a water solution at neutral pH, PAA is an anionic polymer, i.e. many of the side chains of PAA will lose their protons and acquire a negative charge. This makes PAAs polyelectrolytes, with the ability to absorb and retain water and swell to many times their original volume. Dry PAAs are found in the market as white and fluffy powders. Alternative Names: PAA Polymer. CAS No. 9003-1-4. Molecular formula: C3H4O2. Mole weight: 72.06g/mol. IUPAC Name: prop-2-enoic acid. SMILES: C=CC(=O)O. InChI: InChI=1S/C3H4O2/c1-2-3(4)5/h2H,1H2,(H,4,5). | |
| Polyacrylic acid | Polyacrylic acid. Synonyms: PAA, PAAc, Acrysol, Acumer, Alcosperse, Aquatreat, Carbomer, Sokalan. CAS No. 9003-1-4. Product ID: PE-0292. Molecular formula: (C3H4O2)n. Category: Controlled Release Excipients. Product Keywords: Pharmaceutical Excipients; Controlled Release Excipients; Polyacrylic acid; PE-0292; 9003-01-4; (C3H4O2)n; 9003-01-4. Product Description: Poly(acrylic acid) (PAA; trade name Carbomer) is a polymer with the formula (CH2-CHCO2H)n. It is a derivative of acrylic acid (CH2=CHCO2H). In addition to the homopolymers, a variety of copolymers and crosslinked polymers, and partially deprotonated derivatives thereof are known and of commercial value. | |
| Polyacrylic Acid | Acrylic acid is a colorless liquid with a distinctive acrid odor. Flash point 130°F. Boiling point 286°F. Freezing point 53°F. Corrosive to metals and tissue. Prolonged exposure to fire or heat can cause polymerization. If polymerization takes place in a closed container, violent rupture may occur. The inhibitor (usually hydroquinone) greatly reduces the tendency to polymerize.;Acrylic acid, [waste] appears as a colorless liquid with a distinctive acrid odor. Combustible. Flash point 130°F. Boiling point 286°F. Freezing point 121°F. Corrosive to metals and tissue. May polymerize under prolonged exposure to fire or heat. If polymerization occurs in a container violent rupture may occur. Generally shipped with an inhibitor such as hydroquinone to prevent polymerization.;Liquid;Liquid;COLOURLESS LIQUID WITH PUNGENT ODOUR.;Colorless liquid or solid (below 55°F) with a distinctive, acrid odor.;Colorless liquid or solid (below 55°F) with a distinctive, acrid odor. [Note: Shipped with an inhibitor (e.g., hydroquinone) since it readily polymerizes.]. Molecular formula: C3H4O2;CH2=CHCOOH;C3H4O2. Mole weight: 72.06g/mol. IUPAC Name: prop-2-enoic acid. SMILES: C=CC(=O)O. InChI: InChI=1S/C3H4O2/c1-2-3(4)5/h2H,1H2,(H,4,5). | |
| Poly(acrylic acid) 50% solution | Acrylic acid is a colorless liquid with a distinctive acrid odor. Flash point 130°F. Boiling point 286°F. Freezing point 53°F. Corrosive to metals and tissue. Prolonged exposure to fire or heat can cause polymerization. If polymerization takes place in a closed container, violent rupture may occur. The inhibitor (usually hydroquinone) greatly reduces the tendency to polymerize.;Acrylic acid, [waste] appears as a colorless liquid with a distinctive acrid odor. Combustible. Flash point 130°F. Boiling point 286°F. Freezing point 121°F. Corrosive to metals and tissue. May polymerize under prolonged exposure to fire or heat. If polymerization occurs in a container violent rupture may occur. Generally shipped with an inhibitor such as hydroquinone to prevent polymerization.;Liquid;Liquid;COLOURLESS LIQUID WITH PUNGENT ODOUR.;Colorless liquid or solid (below 55°F) with a distinctive, acrid odor.;Colorless liquid or solid (below 55°F) with a distinctive, acrid odor. [Note: Shipped with an inhibitor (e.g., hydroquinone) since it readily polymerizes.]. CAS No. 9003-1-4. Molecular formula: C3H4O2;CH2=CHCOOH;C3H4O2. Mole weight: 72.06g/mol. IUPAC Name: prop-2-enoic acid. SMILES: C=CC(=O)O. InChI: InChI=1S/C3H4O2/c1-2-3(4)5/h2H,1H2,(H,4,5). | |
| Poly(acrylic acid-co-maleic acid) solution | 1:1 mole ratio of AA:MA. Alternative Names: Poly(acrylic acid-maleic acid), Acrylic acid-maleic acid copolymer. CAS No. 29132-58-9. Molecular formula: C7H8O6. Mole weight: average Mw 3,000. IUPAC Name: (E)-but-2-enedioic acid;prop-2-enoic acid. SMILES: OC(=O)C=C.OC(=O)\C=C\C(O)=O. InChI: InChI=1S/C4H4O4.C3H4O2/c5-3(6)1-2-4(7)8;1-2-3(4)5/h1-2H,(H,5,6)(H,7,8);2H,1H2,(H,4,5)/b2-1+. | |
| Poly(acrylic acid-co-maleic acid) solution | Poly(acrylic acid-co-maleic acid) solution. Group: Biochemicals. Grades: Highly Purified. CAS No. 29132-58-9. Pack Sizes: 100g, 250g, 500g, 1kg, 2kg. Molecular Formula: C21H24O18X2. US Biological Life Sciences. | Worldwide |
| Poly(acrylic acid) (MW 100000) (35% in water) | Poly(acrylic acid) (MW 100000) (35% in water) is a polyacrylic acid with a molecular weight of 100000 (an anionic polymer), which can be used as a corrosion inhibitor and surface stabilizer. Poly(acrylic acid) (MW 100000) can be used for biomedical applications, such as drug delivery[1][2][3][4]. Uses: Scientific research. Category: Signaling pathways. CAS No. 9003-1-4. Pack Sizes: 5 mL; 10 mL; 50 mL. Product ID: HY-W243303M. | |
| Poly(acrylic acid) (MW 2000) | Poly(acrylic acid) (MW 2000) is a polyacrylic acid with a molecular weight of 2000. Poly(acrylic acid) (MW 2000) is an anionic polymer. Poly(acrylic acid) (MW 2000) can be as a corrosion-mitigating and surface-stabilizing agent. Uses: Scientific research. Category: Signaling pathways. CAS No. 9003-1-4. Pack Sizes: 1 g; 5 g. Product ID: HY-W243303A. | |
| Poly(acrylic acid), M.W ~2,000 | Acrylic acid is a colorless liquid with a distinctive acrid odor. Flash point 130°F. Boiling point 286°F. Freezing point 53°F. Corrosive to metals and tissue. Prolonged exposure to fire or heat can cause polymerization. If polymerization takes place in a closed container, violent rupture may occur. The inhibitor (usually hydroquinone) greatly reduces the tendency to polymerize.;Acrylic acid, [waste] appears as a colorless liquid with a distinctive acrid odor. Combustible. Flash point 130°F. Boiling point 286°F. Freezing point 121°F. Corrosive to metals and tissue. May polymerize under prolonged exposure to fire or heat. If polymerization occurs in a container violent rupture may occur. Generally shipped with an inhibitor such as hydroquinone to prevent polymerization.;Liquid;Liquid;COLOURLESS LIQUID WITH PUNGENT ODOUR.;Colorless liquid or solid (below 55°F) with a distinctive, acrid odor.;Colorless liquid or solid (below 55°F) with a distinctive, acrid odor. [Note: Shipped with an inhibitor (e.g., hydroquinone) since it readily polymerizes.]. CAS No. 9003-1-4. Molecular formula: C3H4O2;CH2=CHCOOH;C3H4O2. Mole weight: 72.06g/mol. IUPAC Name: prop-2-enoic acid. SMILES: C=CC(=O)O. InChI: InChI=1S/C3H4O2/c1-2-3(4)5/h2H,1H2,(H,4,5). | |
| Poly(acrylic acid), M.W ~3,000 | Acrylic acid is a colorless liquid with a distinctive acrid odor. Flash point 130°F. Boiling point 286°F. Freezing point 53°F. Corrosive to metals and tissue. Prolonged exposure to fire or heat can cause polymerization. If polymerization takes place in a closed container, violent rupture may occur. The inhibitor (usually hydroquinone) greatly reduces the tendency to polymerize.;Acrylic acid, [waste] appears as a colorless liquid with a distinctive acrid odor. Combustible. Flash point 130°F. Boiling point 286°F. Freezing point 121°F. Corrosive to metals and tissue. May polymerize under prolonged exposure to fire or heat. If polymerization occurs in a container violent rupture may occur. Generally shipped with an inhibitor such as hydroquinone to prevent polymerization.;Liquid;Liquid;COLOURLESS LIQUID WITH PUNGENT ODOUR.;Colorless liquid or solid (below 55°F) with a distinctive, acrid odor.;Colorless liquid or solid (below 55°F) with a distinctive, acrid odor. [Note: Shipped with an inhibitor (e.g., hydroquinone) since it readily polymerizes.]. CAS No. 9003-1-4. Molecular formula: C3H4O2;CH2=CHCOOH;C3H4O2. Mole weight: 72.06g/mol. IUPAC Name: prop-2-enoic acid. SMILES: C=CC(=O)O. InChI: InChI=1S/C3H4O2/c1-2-3(4)5/h2H,1H2,(H,4,5). | |
| Poly(acrylic acid) (MW 450000) | Poly(acrylic acid) (MW 450000) is a polyacrylic acid with a molecular weight of 450000. Poly(acrylic acid) (MW 450000) is an anionic polymer. Poly(acrylic acid) (MW 450000) can be as a corrosion-mitigating and surface-stabilizing agent[1]. Uses: Scientific research. Category: Signaling pathways. CAS No. 9003-1-4. Pack Sizes: 5 g; 10 g. Product ID: HY-W243303E. | |
| Poly(acrylic acid), M.W ~450,000 | Acrylic acid is a colorless liquid with a distinctive acrid odor. Flash point 130°F. Boiling point 286°F. Freezing point 53°F. Corrosive to metals and tissue. Prolonged exposure to fire or heat can cause polymerization. If polymerization takes place in a closed container, violent rupture may occur. The inhibitor (usually hydroquinone) greatly reduces the tendency to polymerize.;Acrylic acid, [waste] appears as a colorless liquid with a distinctive acrid odor. Combustible. Flash point 130°F. Boiling point 286°F. Freezing point 121°F. Corrosive to metals and tissue. May polymerize under prolonged exposure to fire or heat. If polymerization occurs in a container violent rupture may occur. Generally shipped with an inhibitor such as hydroquinone to prevent polymerization.;Liquid;Liquid;COLOURLESS LIQUID WITH PUNGENT ODOUR.;Colorless liquid or solid (below 55°F) with a distinctive, acrid odor.;Colorless liquid or solid (below 55°F) with a distinctive, acrid odor. [Note: Shipped with an inhibitor (e.g., hydroquinone) since it readily polymerizes.]. CAS No. 9003-1-4. Molecular formula: C3H4O2;CH2=CHCOOH;C3H4O2. Mole weight: 72.06g/mol. IUPAC Name: prop-2-enoic acid. SMILES: C=CC(=O)O. InChI: InChI=1S/C3H4O2/c1-2-3(4)5/h2H,1H2,(H,4,5). | |
| Poly(acrylic acid) partial potassium salt | The hydrophilic polymer contains polar or charged functional groups, making it soluble in water. Alternative Names: Potassiumpolyacrylate;Poly(acrylic acid) partial potassium salt;POLY(ACRYLIC ACID), POTASSIUM SALT, LIGH TLY CROSS-LINKED;Polyacrylsure, Kaliumsalz;Potassium polyacrylate poly(acrylic acid), potassium salt;POLY(ACRYLIC ACID), POTASSIUM SALT;2-propenoicacid,homopolymer,potassiumsalt;Acrylic acid homopolymer potassium salt. CAS No. 25608-12-2. Molecular formula: C6H7KO4. Mole weight: 110.15g/mol. IUPAC Name: potassium;prop-2-enoate. SMILES: [K+].OC(=O)C=C.[O-]C(=O)C=C. InChI: 1S/C3H4O2.K/c1-2-3(4)5;/h2H,1H2,(H,4,5);/q;+1/p-1. | |
| Poly(acrylic acid) partial potassium salt | Poly(acrylic acid) partial potassium salt. CAS No. 25608-12-2. Product ID: ALC-FP-25608122. Alfa Chemistry - ISO 9001:32057 Certified. | |
| Poly(acrylic acid) partial sodium salt solution | Sodium salt of poly(acrylic acid) is a superabsorbent polymer. Superabsorbents are composed of crosslinked networks of hydrophilic polymers. It can absorb and retain a large capacity of water based fluids, the release of the absorbed fluids is tough even under an applied pressure. Absorption capacity is inversely proportional to salt concentration and applied load.They are formed via solution or inverse-suspension polymerization techniques. . Alternative Names: Acrylic acid-sodium acrylate copolymer, Sodium acrylate-acrylic acid copolymer. CAS No. 9033-79-8. Mole weight: average Mw ~2,000 by GPC. | |
| Poly(acrylic acid), powder (Mw.: ~2,000) | Poly(acrylic acid), powder (Mw.: ~2,000). CAS No. 9003-1-4. Product ID: ALC-FP-9003014. Mole weight: ~2000. Alfa Chemistry - ISO 9001:32057 Certified. | |
| Poly(acrylic acid), powder, M.W ~2000 | Acrylic acid is a colorless liquid with a distinctive acrid odor. Flash point 130°F. Boiling point 286°F. Freezing point 53°F. Corrosive to metals and tissue. Prolonged exposure to fire or heat can cause polymerization. If polymerization takes place in a closed container, violent rupture may occur. The inhibitor (usually hydroquinone) greatly reduces the tendency to polymerize.;Acrylic acid, [waste] appears as a colorless liquid with a distinctive acrid odor. Combustible. Flash point 130°F. Boiling point 286°F. Freezing point 121°F. Corrosive to metals and tissue. May polymerize under prolonged exposure to fire or heat. If polymerization occurs in a container violent rupture may occur. Generally shipped with an inhibitor such as hydroquinone to prevent polymerization.;Liquid;Liquid;COLOURLESS LIQUID WITH PUNGENT ODOUR.;Colorless liquid or solid (below 55°F) with a distinctive, acrid odor.;Colorless liquid or solid (below 55°F) with a distinctive, acrid odor. [Note: Shipped with an inhibitor (e.g., hydroquinone) since it readily polymerizes.]. CAS No. 9003-1-4. Molecular formula: C3H4O2;CH2=CHCOOH;C3H4O2. Mole weight: 72.06g/mol. IUPAC Name: prop-2-enoic acid. SMILES: C=CC(=O)O. InChI: InChI=1S/C3H4O2/c1-2-3(4)5/h2H,1H2,(H,4,5). | |
| Poly(acrylic acid), powder (mw ~4,000,000) | Poly(acrylic acid), powder (mw ~4,000,000). CAS No. 9003-1-4. Product ID: ALC-FP-9003014A. Mole weight: ~4,000,000. Alfa Chemistry - ISO 9001:32057 Certified. | |
| Poly(acrylic acid sodium salt) | Liquid;Liquid;WHITE POWDER WITH CHARACTERISTIC ODOUR. CAS No. 9003-4-7. Molecular formula: (C3H3O2)n??Na;C3H3NaO2. Mole weight: 94.04g/mol. IUPAC Name: sodium;prop-2-enoate. SMILES: C=CC(=O)[O-].[Na+]. InChI: InChI=1S/C3H4O2.Na/c1-2-3(4)5;/h2H,1H2,(H,4,5);/q;+1/p-1. | |
| POLY(ACRYLIC ACID), SODIUM SALT | POLY(ACRYLIC ACID), SODIUM SALT. Alternative Names: opanediyldi-2-propenoateandsodium2-propenoate;poly(acrylicacid)partialsodiumsalt. CAS No. 76774-25-9. Molecular formula: C21H27NaO10. Mole weight: 462.4g/mol. IUPAC Name: sodium;2,2-bis(prop-2-enoyloxymethyl)butyl prop-2-enoate;prop-2-enoate;prop-2-enoic acid. SMILES: CCC(COC(=O)C=C)(COC(=O)C=C)COC(=O)C=C.C=CC(=O)O.C=CC(=O)[O-].[Na+]. InChI: InChI=1S/C15H20O6.2C3H4O2.Na/c1-5-12(16)19-9-15(8-4,10-20-13(17)6-2)11-21-14(18)7-3;2*1-2-3(4)5;/h5-7H,1-3,8-11H2,4H3;2*2H,1H2,(H,4,5);/q;;;+1/p-1. | |
| POLY(ACRYLIC ACID), SODIUM SALT | POLY(ACRYLIC ACID), SODIUM SALT. Alternative Names: opanediyldi-2-propenoateandsodium2-propenoate;poly(acrylicacid)partialsodiumsalt. CAS No. 76774-25-9. Product ID: ACM76774259-3. Molecular formula: C21H27NaO10. Mole weight: 462.4g/mol. IUPAC Name: sodium;2,2-bis(prop-2-enoyloxymethyl)butyl prop-2-enoate;prop-2-enoate;prop-2-enoic acid. Canonical SMILES: CCC(COC(=O)C=C)(COC(=O)C=C)COC(=O)C=C.C=CC(=O)O.C=CC(=O)[O-].[Na+]. Alfa Chemistry - ISO 9001:32057 Certified. | |
| Poly(acrylic acid, sodium salt) solution | Liquid;Liquid;WHITE POWDER WITH CHARACTERISTIC ODOUR. CAS No. 9003-4-7. Molecular formula: (C3H3O2)n??Na;C3H3NaO2. Mole weight: 94.04g/mol. IUPAC Name: sodium;prop-2-enoate. SMILES: C=CC(=O)[O-].[Na+]. InChI: InChI=1S/C3H4O2.Na/c1-2-3(4)5;/h2H,1H2,(H,4,5);/q;+1/p-1. | |
| Poly(acrylic acid) solution | Acrylic acid is a colorless liquid with a distinctive acrid odor. Flash point 130°F. Boiling point 286°F. Freezing point 53°F. Corrosive to metals and tissue. Prolonged exposure to fire or heat can cause polymerization. If polymerization takes place in a closed container, violent rupture may occur. The inhibitor (usually hydroquinone) greatly reduces the tendency to polymerize.;Acrylic acid, [waste] appears as a colorless liquid with a distinctive acrid odor. Combustible. Flash point 130°F. Boiling point 286°F. Freezing point 121°F. Corrosive to metals and tissue. May polymerize under prolonged exposure to fire or heat. If polymerization occurs in a container violent rupture may occur. Generally shipped with an inhibitor such as hydroquinone to prevent polymerization.;Liquid;Liquid;COLOURLESS LIQUID WITH PUNGENT ODOUR.;Colorless liquid or solid (below 55°F) with a distinctive, acrid odor.;Colorless liquid or solid (below 55°F) with a distinctive, acrid odor. [Note: Shipped with an inhibitor (e.g., hydroquinone) since it readily polymerizes.]. CAS No. 9003-1-4. Molecular formula: C3H4O2;CH2=CHCOOH;C3H4O2. Mole weight: 72.06g/mol. IUPAC Name: prop-2-enoic acid. SMILES: C=CC(=O)O. InChI: InChI=1S/C3H4O2/c1-2-3(4)5/h2H,1H2,(H,4,5). | |
| Poly(acrylic acid) solution | Poly(acrylic acid) solution. Group: Biochemicals. Alternative Names: Carbomer 940. Grades: Molecular Biology Grade. CAS No. 9003-1-4. Pack Sizes: 100g, 250g, 500g. US Biological Life Sciences. | Worldwide |
| Poly(acrylic acid) (technical grade) | Poly(acrylic acid) (technical grade). Alternative Names: Acrylicacidhomopolymer. CAS No. 9003-1-4. Purity: Tech. Product ID: ACM9003014-34. Mole weight: M.W ~2000. Alfa Chemistry - ISO 9001:32057 Certified. | |
| Polyacrylic Resin ? | Polyacrylic Resin ?. CAS No. 24938-16-7. Product ID: PE-0464. Molecular formula: (C29H52O6)n. Mole weight: 150000. Category: Binder Excipients. Product Keywords: Pharmaceutical Excipients; Excipients for Solid Dosage Form; Polyacrylic Resin ?; Binder Excipients; Binder Excipients; (C29H52O6)n; 24938-16-7; 24938-16-7. UNII: 905HNO1SIH. Chemical Name: Poly(butyl methacrylate, (2-dimethylaminoethyl) methacrylate, methyl methacrylate) 1 : 2 : 1. Grade: Pharmceutical Excipients. Administration route: Oral. Dosage Form: Oral capsules and tablets. Stability and Storage Conditions: The polymer in dry powder state is stable at temperatures below 30°C. Above this temperature, the powder is easy to agglomerate, but this phenomenon does not affect the quality of the material, and the lumps are easy to crush. The polymer in dry powder state is stable for 3 years when stored in a sealed container at a temperature below 30°C. Aqueous dispersions are very sensitive to temperature and delamination occurs below 0°C. Therefore, the water dispersion should be transported and stored in a sealed container at a temperature of 5-25°C, and it is stable for at least 19 months after delivery from the manufacturer's warehouse. Source and Preparation: Polymerized from acrylic and methacrylic acid or their various esters. Applications: It can be used as film coating material; tablet binder; tablet diluent. Polyacrylic resins are mainly used | |
Our database is helping our users find suppliers everyday.
